Composed of refined dry vegetable oil, red iron oxide and other anti-rust pigments, physical pigments, driers, additives and solvents from the preparation of the oil-based anti-rust paint.

Key Features

               * Has good adhesion

               * Has good construction performance

               • Excellent wettability to porous and rough steel surfaces

               * Can be used with oily, phenolic, alkyd and other traditional products supporting the use

               • Dry slowly

Use for indoor and outdoor general requirements of the surface of steel structures for rust-proof primer purposes.

Appearance iron red.

Construction parameters

               Volume of solid 60 ± 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

               Dry film thickness 35mm

               Wet film thickness of 64mm

               Theoretical amount of 102g / m2

               A flash point of 40 ° C

               Drying time (25 ℃)

               Table dry ≤ 6h

               Hard work ≤ 24h

Overcoating interval time

Recommended coating number 2, dry film thickness greater than 70mm

After supporting all kinds of oil with paint, phenolic, alkyd-type finish

Surface treatment

              · Scaled steel: sandblasted to Sa2 (or Sa2.5 grade; can also be used to remove oxide scale and acid rust)

              * No oxide steel: Elastic grinding wheel grinding to St3 level

              · Steel coated with shop primer: paint film damage and rust at the second rust grinding to St3 level

              * Welding, flame cutting or fire correction Combustion: polished to St3 level

              · The old paint film (referring to the same type) Substrate: Remove the old failure of the loose film and rust, pneumatic or electric grinding tools to deal with St3

Construction conditions

              • Substrate temperature should be above 3 ℃ above dew point

              · Relative humidity not more than 85%

Coating method

Airless spray

          Diluent 104 Diluent

          Dilution 0-5% (by weight of paint)

          Nozzle diameter 0.4-0.5mm

          The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

  Air spraying

              Diluent 104 Diluent

              Dilution 0-10% (by weight of paint)

              Nozzle diameter of 2.0-3.0mm

              Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

Roll coating / brushing

          Diluent 104 Diluent

          Dilution 0-3% (by weight of paint)

Cleaner 104 Diluent

For safety measures, refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd.

Packaging 20L barrels 29kg

Shelf life of 12 months

Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.