Composed of Hongdan powder, refined dry vegetable oil, driers, additives and solvents such as the preparation of the oil-based red lead rust-proof paint.

Key Features

               • Excellent wettability to porous and rough steel surfaces

               · Has good adhesion

               * Can be used with oily, phenolic, alkyd and other traditional products supporting the use

               • Dry slowly

               * Has good construction performance

Uses Applicable to ships above the waterline steel plate, steel machinery and equipment, onshore steel structure for the use of anti-rust paint.

The appearance of orange.

Construction parameters

               Volume solid content 59 ± 3% (according to GB / T9272 eqv ISO3233: 1998 determination)

               The dry film thickness is 40mm

               Wet film thickness 68mm

               The theoretical amount of 137g / m2

               A flash point of 40 ° C

               Drying time 25 ℃

               Table dry ≤ 8 h

               Hard work ≤ 24 h

Overcoating interval time

Recommended coating number 2, dry film thickness greater than 80mm

After supporting all kinds of paint with phenolic, ester gum, alkyd-type finish

Surface treatment

              * There are oxide steel: sandblasting to Sa2 level

              * No oxide steel: Elastic grinding wheel grinding to St3 level

              · Steel coated with shop primer: paint film damage and rust at the second rust grinding to St3 level

              * Welding, flame cutting or fire correction Combustion: polished to St3 level

              · The old paint film (referring to the same type) Substrate: Remove the old failure of the loose film and rust, pneumatic or electric grinding tools to deal with St3

Construction conditions

              • Substrate temperature should be above 3 ℃ above dew point

              · Relative humidity not more than 85%

Coating method

Airless spray

          Diluent 104 Diluent

          Dilution 0-5% (by weight of paint)

          Nozzle diameter 0.4-0.5mm

          The discharge pressure 12-15Mpa (about 120-150kg / cm2)

  Air spraying

              Diluent 104 Diluent

              Dilution 0-10% (by weight of paint)

              Nozzle diameter of 2.0-3.0mm

              Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

Roll coating / brushing

              Diluent 104 Diluent

              Dilution 0-3% (by weight of paint)

Cleaner 104 Diluent

For safety measures, refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd.

Packaging 10L barrels 19kg

Shelf life of 12 months

Note

· Reddan paint film should not be exposed in the air for too long, otherwise the film is easy to white or discoloration, as soon as possible coating matching finish

· Hongdan paint should not be long-term immersion, can not be used for waterline and bottom parts

· The paint film contains red lead, which should not be used in the sealed cabin with firework correction to prevent lead poisoning.

Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.