<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          F06-11336-1White phenolic primer

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of phenolic paint, titanium dioxide and other pigments, physical pigments, driers, additives and solvents from the preparation.

          Key Features

                         Good adhesion to primer and topcoat

                         * Has a good hiding power

                         * Has good construction performance

          Use for white or light-colored topcoat and anti-rust paint for the middle between the coating, can save the amount of paint used.

          Appearance white, half-light

          Construction parameters Volume of solid 50 3% (GB / T9272 eqv ISO3233: 1998 provisions of the determination)

                         Dry film thickness 35mm

                         Wet film thickness 70mm

                         Theoretical amount of 112g / m2

                         A flash point of 35 C

                         Drying time (25 )

                         Table dry 4h

                         Hard work 24h

          Overcoating interval time

          temperature
          52030
          The shortest48h24h20h
          longest3 months

          Recommended coating Road 1, dry film thickness 35mm

          Before the Road supporting a variety of oil paint, phenolic, alkyd primer

          After supporting paint with white, light, red phenolic or alkyd type finish

          Surface treatment

                        • Before the primer should be completely dry

                        • Remove the oil and dirt from the primer film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    Spray pressure 12-15 Mpa (about 120-150kg / cm2)

            Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.4 MPa (about 3-4 kg / cm2)

          Roll coating / brushing

                        Diluent 104 Diluent

                        Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 29kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>