Composed of phenolic paint, red lead powder, driers, additives and solvents such as the preparation of phenolic red lead rust paint

Key Features

               * High content of red with good anti-rust performance

               · Has good adhesion

               · Fast drying

               * Has good construction performance

Uses Applicable to the land-based steel structure, the ship above the waterline parts for the use of anti-rust paint, with phenolic, alkyd and other traditional type of matching supporting the use of paint.

The appearance of orange-red, paint film light

Construction parameters Volume solids 53 ± 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

               The dry film thickness is 40mm

               Wet film thickness of 75mm

               Theoretical amount of 152g / m2

               A flash point of 34 ° C

               Drying time (25 ℃)

               Table dry ≤ 5h

               Hard work ≤ 24h

Overcoating interval time

Recommended coating number 2, dry film thickness greater than 80mm

After supporting all kinds of paint with phenolic and alkyd-type finish

Surface treatment

              * There are oxide steel: sandblasting to Sa2 level

              * No oxide steel: pneumatic or electric grinding tools, polished to St3 level or sandblasting to Sa2 level

              · Steel coated with shop primer: paint film damage and rust at the second rust grinding to St3 level

              * Welding, flame cutting or fire correction Combustion: polished to St3 level

              · The old paint film (referring to the same type) Substrate: Remove the old failure of the loose film and rust, pneumatic or electric grinding tools to deal with St3

Construction conditions

              • Substrate temperature should be above 3 ℃ above dew point

              · Relative humidity not more than 85%

Coating method

Airless spray

          Diluent 104 Diluent

          Dilution 0-5% (by weight of paint)

          Nozzle diameter 0.4-0.5mm

          The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

  Air spraying

              Diluent 104 Diluent

              Dilution 0-10% (by weight of paint)

              Nozzle diameter of 2.0-3.0mm

              Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

Roll coating / brushing

          Diluent 104 Diluent

          Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

Packaging 10L barrels 18kg

Shelf life of 12 months

Note

· Can not be used alone (weather resistance is not good), must be used with the topcoat.

Red paint should not be exposed in the air for too long, otherwise the film is easy to white or discoloration.

· Hongdan paint should not be long-term immersion, can not be used for waterline and bottom parts

· The paint film contains red lead, which should not be used in the sealed cabin with firework correction to prevent lead poisoning.

Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.