<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          F42-31 Colored phenolic deck paint871873874875876

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of phenolic paint, excellent wear resistance of pigments, physical pigments, driers, additives and solvents and other components.

          Key Features

                          Good abrasion resistance and scrub resistance

                          Good water resistance and oil resistance

                          Has good adhesion

                         * Has a good leveling

          Uses Applicable to ship steel or wood deck for deck paint.

          Exterior

          product code04-3704-3804-3904-4004-41
          Product numberF42-31F42-31F42-31F42-31F42-31
          product name871873874875876
          ColourPurple redGreenBlackGrayGrass green

          Construction parameters

          product name871873874875876
          Volume solids % *483433443443433
          Dry film thickness mm4040404040
          Wet film thickness mm8393919193
          Theoretical consumption  g/m210810489102103

          * Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)

          A flash point of 35 C

          Drying time (25 )

          Refers to dry 4h

          Hard work 24h

          Overcoating interval time

          temperature52030
          The shortest48h24h16h
          longestUnlimited

          Recommended coating number 2, dry film thickness of 70mm

          712 Hongdan phenolic anti-rust paint or 716 Hongdan alkyd antirust paint, 725 zinc yellow phenolic antirust paint, 706 antirust paint, C53-38 aluminum iron antirust paint, C53-41 iron red multi Uses Primer and other phenolic and alkyd-type anti-rust paint.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

          Coating method

                    Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

           Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.5MPa (about 3-5kg / cm2)

          Roll coating / brushing

                    Diluent 104 Diluent

                    Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging

          product name871873874875876
          20 L22kg22kg19kg23kg20kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>