<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          F41-31 Colored phenolic water paint821822826829829-1

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of phenolic resin and dry vegetable oil into the paints, coloring pigments, physical pigments, driers and solvents and other components.

          Key Features

                         * Has good water resistance and resistance to oil properties

                          Good wet and dry resistance

                         With phenolic, alkyd primer has a good supporting and inter-layer adhesion

                         * Has good construction performance

          Application It is suitable for the protection decoration between the ship's light and heavy waterline.


          product code04-3204-3304-3404-3504-36
          Product numberF41-31F41-31F41-31F41-31F41-31
          product name821822826829829-1
          ColourWhiteBlackPurple redGreenBright green

          Construction parameters

          product name821822826829829-1
          Volume solids % *333453473433403
          Dry film thickness mm3535353535
          Wet film thickness mm10678748188
          Theoretical consumptiong/m213876968997

          * Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)

                          A flash point of 35 C

                          Drying time (25 )

                          Refers to dry 4h

                          Hard work 24h

                         Overcoating interval time

          The shortest36h24h16h

          Recommended coating number 2, dry film thickness of 70mm

          615-1 aluminum paint chlorinated rubber antirust paint, 615-2 aluminum powder chlorinated rubber antirust paint, 616 chlorinated rubber iron red thick slurry antirust paint.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)

           Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

          Roll coating / brushing

                     Diluent 104 Diluent

                     Dilution 0-3% (by weight of paint)

                     Cleaner 104 Diluent

          For safety precautions, please refer to the Material Safety Data Sheet (MSDS) of Anhui New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).


          product name821822826829829-1
          20 L22kg19kg22kg20kg20kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>