Composed of modified alkyd resin, red lead powder, rust paint, fillers, driers, additives and solvents consisting of fast-drying anti-rust primer.

Key Features

               * Has good anti-rust performance

               · Has good adhesion

               · Fast drying

               * Has good construction performance

Uses Applicable to the onshore steel structure, the ship above the waterline parts for quick-drying anti-rust paint purposes, with phenolic, alkyd, chlorinated rubber and other supporting the use of topcoats.

The appearance of orange, paint dull

Construction parameters

               Volume solids 40 ± 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

               The dry film thickness is 40mm

               Wet film thickness of 100mm

               Theoretical amount of 150g / m2

               A flash point of 27 ° C

               Drying time (25 ℃)

               Table dry ≤ 30min

               Hard work ≤ 3h

Overcoating interval time

Recommended coating number 2, dry film thickness 80mm

After supporting all kinds of paint with phenolic, alkyd and chlorinated rubber, and other topcoats

Surface treatment

              * There are oxide steel: sandblasting to Sa2.5 level

              * No oxide steel: power tools polished to St3 level

              · Coated with workshop primer steel: paint damage and rust at the second rust grinding to St3 level

              * Welding, flame cutting or fire correction Combustion: polished to St3 level

              * There are old paint substrate: to remove the failure of the old film and rust rust to power tools polished to St3 level

Substrate temperature

              • Substrate temperature should be above 3 ℃ above dew point

              · Relative humidity not more than 85%

Coating method

Airless spray

              Spray diameter 0.4-0.5mm

              The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

              Diluent 101 Diluent

              Dilution 0-5% (by weight of paint)

Air spraying

              Diluent 101 Diluent

              Dilution 0-10% (by weight of paint)

              Nozzle diameter of 2.0-3.0mm

              Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

Roll coating / brushing

              Diluent 101 Diluent

              Dilution 0-3% (by weight of paint)

Cleaner 101 Diluent

For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

Packaging 20L barrels 25kg

Storage period of 12 months

Note

* Because of poor weather resistance, can not be used alone, must be used with the topcoat

· Red paint should not be exposed in the air for too long, otherwise the film is easy to white or discoloration, paint should be painted as soon as possible

· Hongdan paint should not be long-term immersion, can not be used for waterline and bottom parts

· The paint film contains red lead, which should not be used in the sealed cabin with firework correction to prevent lead poisoning.

• If the viscosity of the paint increases, dilution with 101 Diluent can be used

Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.