<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          C54-31 All kinds of alkyd-resistant paint763764

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composition by the special alkyd resin, coloring pigments, titanium dioxide, anti-rust pigments, additives and solvents and other components.

          Key Features

                         * Film has good resistance to oil properties

                          Tough film has good impact strength

                         * Has good construction performance

          Use Apply to ship engine room inner wall, main engine or auxiliary machine casing and so on contact oil the occasion.

          Exterior 

                         C54-31 (763) Light gray (also known as machine gray)

                         C54-31 (764) milky yellow

          Construction parameters

          product nameC54-31(763)C54-31(764)
          ExteriorLight grayMilk yellow
          Volume solids % *423423
          Dry film thickness  mm3030
          Wet film thickness  mm7171
          Theoretical consumption  g/m28585
          Flash point  3535
          Drying time25棩Table dry    h44
          Hard work   h2424

          * Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)

          Overcoating interval time

          temperature  5  20  30
          The shortest48h24h16h
          longestUnlimited

          Recommended coating number 2, dry film thickness 60mm

          Before the Road supporting the use of paint 706 aluminum-iron anti-rust paint, 712 Hongdan phenolic anti-rust paint and other phenolic, alkyd-type anti-rust paint. Or painted directly on steel surfaces that meet the quality requirements for derusting (4 passes required).

          Surface treatment

                        Sandblasting treatment to Sa2 level

                        Acid pickling method can also be used to remove rust and rust

                        No oxide steel surface can also be used pneumatic or electric grinding tools polished to St3 level

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

           

          Coating method

          Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

          Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.5MPa (about 3-5kg / cm2)

          Roll coating / brushing

                    Diluent 104 Diluent

                    Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 22kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>