<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          Various colors of alkyd mast paint£¨886-4¡¢886-5¡¢886-6£©

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of alkyd resin, titanium dioxide and other color pigments, driers and solvents and other components.

          Key Features

                         ¡¤ Has a good color retention and weather resistance

                         ¡¤ The film is bright and colorful

                         * Has a certain water resistance

                         * Has good flexibility and adhesion

                         * Has good construction performance

          Uses Applicable to ship mast, generally used as topcoat onshore steel structure.

          Exterior 

                         886-4 Light cream

                         886-5 golden yellow

                         886-6 milk yellow

          Construction parameters

          product name886-4886-5886-6
          ExteriorLight creamgoldenMilk yellow
          Volume solids % *40¡À340¡À340¡À3
          Dry film thickness  mm303030
          Wet film thickness  mm757575
          Theoretical consumption  g/m2868686
          Flash point ¡æ353535
          Drying time£¨25¡æ£©Table dry ¡Ü h444
          Hard work ¡Ü h242424

          * Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)

          Overcoating interval time

          temperature  5¡æ  20¡æ  30¡æ
          The shortest48h24h16h
          longestNot limited to

          Recommended coating number 2, dry film thickness 60mm

          Former supporting paint with 712 Red Phenolic Antirust Paint, 716 Red Alkyd Antirust Paint, 706 Antirust Paint, 336-1 white phenolic primer, such as phenolic, alkyd-type anti-rust paint matching, but also to 842 epoxy cloud iron antirust paint matching.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 ¡æ above dew point

                        ¡¤ Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure 12-15Mpa (about 120-150kg / cm2)

          Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.5MPa (about 3-5kg / cm2)

          Roll coating / brushing

                    Diluent 104 Diluent

                    Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 22kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can£º

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>