<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          C42-31 All kinds of polyurethane modified alkyd deck paint

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composition of the special alkyd resin, synthetic resin, plasticizer, antirust paint, coloring pigments, additives and solvents and other components of polyurethane modified alkyd deck paint.

          Key Features

                         ¡¤ Good abrasion resistance and scrub resistance

                         ¡¤ Good water resistance and oil resistance

                         ¡¤ Good flexibility and resistance to seawater shock

                         * Has a good leveling

          Use Suitable for deck decking on steel deck

          The appearance of iron red or colored

          Construction parameters

                         Volume of solid 38 ¡À 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

                         Dry film thickness 35mm

                         Wet film thickness 92mm

                         Theoretical amount of 109g / m2

                         A flash point of 31 ¡ã C

                         Drying time (25 ¡æ)

                         Refers to dry ¡Ü 4h

                         Hard work ¡Ü 24h

          Overcoating interval time

          temperature5¡æ20¡æ30¡æ
          The shortest48h24h16h
          longestUnlimited

          Recommended coating number 2, dry film thickness of 70mm

          In addition to supporting the former road with 706 anti-rust paint, C53-38 antirust paint, C53-41 iron red multi-purpose primer and other phenolic, alkyd-type anti-rust paint matching, but also with 842 epoxy cloud iron Anti-rust paint matching.

          Surface treatment

                         • Before the paint should be completely dry

                         • Remove all oil and debris from the paint film

          Construction conditions

                         • Substrate temperature should be above 3 ¡æ above dew point

                         ¡¤ Relative humidity not more than 85%

          Coating method

          Airless spray

                         Diluent 104 Diluent

                         Dilution 0-5% (by weight of paint)

                         Nozzle diameter 0.4-0.5mm

                         The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

          Air spraying

                         Diluent 104 Diluent

                         Dilution 0-5% (by weight of paint)

                         Nozzle diameter of 2.0-3.0mm

                         The discharge pressure is 0.3 to 0.5 MPa (about 3 to 4 kg / cm2)

          Brush / roller

                         Diluent 104 Diluent

                         Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 22kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can£º

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>