<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          C42-32 All kinds of alkyd anti-skid paint deck878879880

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composition to alkyd resin, modified resin, wear-resistant pigments, driers, additives and solvents from the preparation.

          Key Features

                         * Film has good adhesion

                          Has good weather resistance, water resistance, light fastness

                          Rough surface, the ship sailing in the storm to prevent slipping when walking

          Use Apply to the ship's deck for anti-skid coating purposes.


          Product numberC42-32C42-32C42-32
          Color and appearancegrayGrass greenPurple red

          Rough filmRough filmRough film

          Construction parameters 

          product nameC42-32
          Volume solids %*453453453
          Dry film thickness mm404040
          Wet film thickness mm898989
          Theoretical consumption g/m2120120120

          * Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)

          A flash point of 35 C

          Drying time (25 )

          Table dry 4h

          Hard work 24h

          Overcoating interval time

          The shortest36h24h16h

          It is recommended that the number of coating passes be determined with reference to the coating method

          Before the road supporting the use of paint and C53-41 iron red multi-purpose primer matching. But also with H06-4 epoxy zinc-rich anti-rust paint primer,

          842 epoxy cloud iron antirust paint for the middle layer paint matching system supporting.

          Surface treatment

                         • Before the paint should be completely dry

                         • Remove all oil and debris from the paint film

          Construction conditions

                         • Substrate temperature should be above 3 above dew point

                          Relative humidity not more than 85%

          Coating method

          Scratch / brush can be applied in the following two ways

          Deck anti-slip paint consists of deck paint, cement and sand three components sub-assembly. Before the use of cement and sand to be screened with 20 mesh to avoid the occurrence of sandwich. Such as cement, sand-owned, shall meet the following requirements:

          Cement: Dry 400 # cement, should be screened with 20 mesh before use

          Yellow sand: river sand or sea sand can be, dry and clean without mud, grain by 20-60 mesh

          25 parts of anti-slip paint, 6 parts of yellow sand and 6 parts of cement (weight ratio) are mixed in proportion and agitated until there is no sand. With paint brush or rubber scraper coating 2-3 Road, film thickness of about 1.5mm

          Apply a deck anti-slip paint (without cement yellow sand) to the deck with anti-corrosive paint applied, then sprinkle 20-60 mesh yellow sand on the dry paint, and remove the unbonded cement after 24 hours Yellow sand, and then painted two deck anti-skid paint, so that sand in the sand between the film

                        Diluent xylene

                        Dilution 0-3% (by weight of paint)

          Cleaning agent xylene

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 25kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>