Composition by the alkyd resin, modified resin, rust paint, coloring pigments, physical pigments, additives and solvents and other components.

Key Features

               * Has good anti-rust performance

               · Has good water resistance and salt water resistance

               With alkyd, phenolic, chlorinated rubber, epoxy and other supporting the use of topcoats

Uses Applicable to the ship above the waterline parts, onshore steel structure for anti-rust paint purposes, with alkyd, phenolic, chlorinated rubber, epoxy and other supporting the use of topcoats.

Color iron red

Construction parameters

               Volume solid 50 ± 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

               Dry film thickness of 30mm

               Wet film thickness 60mm

               Theoretical amount of 92g / m2

               The flash point of 27 ° C

               Drying time (25 ℃)

               Refers to dry ≤ 2h

               Hard work ≤ 24h

               Overcoating interval time

Recommended coating Road 1-2, dry film thickness of 30-60mm

After supporting paint can be used directly with alkyd, phenolic, chlorinated rubber, epoxy and other finishes.

Such as the 842 epoxy cloud iron antirust paint for the intermediate transition layer paint and chlorinated rubber, epoxy, polyurethane and other supporting paint with a strong solvent effect is better.

Surface treatment

               * There are oxide steel: sandblasting to Sa2.5 level

               · No oxide steel: sandblasted to Sa2.5 level, or pneumatic or electric flexible grinding wheel grinding to St3 level

               · Coated with the old paint of steel: paint film damage, the rust must be the second rust, polished to St3 level.

                The film must be in good condition to remove all the oil film and debris

Construction conditions

               • Substrate temperature should be above 3 ℃ above dew point

               · Relative humidity not more than 85%

Coating method

Airless spray

              Diluent 101 Diluent

              Dilution 0-5% (by weight of paint)

              Nozzle diameter 0.4-0.5mm

              Spray pressure 12-15 MPa (about 120-150kg / cm2)

Air spraying

              Diluent 101 Diluent

              Dilution 0-5% (by weight of paint)

              Nozzle diameter of 2.0-3.0mm

              Spray pressure 0.3-0.5MPa (about 3-5 kg / cm2)

Brush / roller

              Diluent 101 Diluent

              Dilution 0-3% (by weight of paint)

Cleaner 101 Diluent

For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

Packaging 20L barrels 22kg

Shelf life of 12 months

Note that when painting the paint, dry film thickness should not exceed 80mm.

Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.