<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          887887-1 Iron red alkyd paint

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of alkyd resin and dry vegetable oil into the paints, red iron oxide, driers, additives and solvents prepared from the cargo tank finish.

          Key Features

                          Tough and bright film

                         With phenolic, alkyd primer has a good interlayer adhesion

                         * Has good wear resistance

                         * Has good construction performance

          Uses Applicable to non-corrosive dry cargo tanks for ships.

          Appearance iron red

          Construction parameters

                         Volume of solid 44 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

                         Dry film thickness of 30mm

                         Wet film thickness 68mm

                         Theoretical amount of 90g / m2

                         A flash point of 35 C

                         Drying time (25 )

                         Table dry 4h

                         Hard work 24h

          Overcoating interval time

          temperature  5  20  30
          The shortest48h24h16h
          longestUnlimited

          Recommended coating number 2, dry film thickness greater than 60mm

          Former supporting paint with 712 Red Phenolic Antirust Paint, 716 Red Alkyd Antirust Paint, 706 Antirust Paint, C53-41 iron red multi-purpose primer and other phenolic, alkyd-type anti-rust paint matching, but also Can be 842 epoxy cloud iron antirust paint matching.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure is 12 to 15 MPa (about 120 to 150 kg / cm2)

          Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.5MPa (about 3-5kg / cm2)

          Roll coating / brushing

                    Diluent 104 Diluent

                    Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L drums 23kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>