<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          Colored alkyd cabin paint901902903904905906

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composition from the alkyd resin, titanium dioxide, color pigments, physical pigments, driers, additives and solvents and other components.

          Key Features

                          Has good color retention

                          The film is bright and colorful

                          Has a certain degree of water resistance and oil resistance

                         * Has good flexibility and adhesion

                         * Has good construction performance

          Uses For ships in the cabin, cabin, restaurant, corridor, onshore indoor steel structure for topcoat purposes.


          product code901902903904905906
          product code07-1007-1107-1207-1307-1407-15
          ExteriorpearlLight creamLake blueSky blueLake greenLight green

          Construction parameters

          Dry film thickness
          product name901902903904905906
          ExteriorpearlLight creamLake blueSky blueLake greenLight green
          Volume solids % *383383383383383383

          Wet film thickness mm797979797979
          Theoretical consumption  g/m2898989898989
          Flash point  353535353535
          Drying time25棩Table dryh444444
          Hard workh242424242424

          * Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)

          Overcoating interval time

          temperature  5  20  30
          The shortest48h24h16h

          Recommended coating number 2, dry film thickness greater than 60mm

          712 Hongdan phenolic anti-rust paint, 716 red lead alkyd antirust paint, 725 zinc aldehyde antirust paint, 706 antirust paint, 336-1 white phenolic primer such as phenolic, alkyd-type Rust paint matching.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 104 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure 12-15Mpa (about 120-150kg / cm2)

          Air spraying

                        Diluent 104 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.5MPa (about 3-5kg / cm2)

          Roll coating / brushing

                    Diluent 104 Diluent

                    Dilution 0-3% (by weight of paint)

          Cleaner 104 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 20kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>