Composition consists of chlorinated rubber, plasticizer, anti-rust paint, coloring pigments, additives and solvents and other components.
Key Features
Water vapor and oxygen permeability of the paint film is low, with excellent water resistance and good corrosion resistance and decorative
Dry fast, several times faster than the oil-based paint dry
· Excellent low-temperature construction performance, can be -20 ℃ ~ 50 ℃ environment construction
· The coating layer is miscible with each other and has excellent interlayer adhesion. When the old paint film is re-repaired on the chlorinated rubber, it is not necessary to get rid of the old paint film and easy to maintain.
· Has good weather resistance and durability
Application It is suitable for the protection decoration between the ship's light and heavy waterline.
Exterior
| Product number | J41-31 | J41-31 |
| product code | 626(08-28) | 629(08-31) |
| Iron red, semi-light | Green, half-light |
Construction parameters
| product name | 626 | 629 |
| Volume solids % * | 42±3 | 42±3 |
| Dry film thickness mm | 40 | 40 |
| Wet film thickness mm | 95 | 95 |
| Theoretical consumption g/m2 | 121 | 121 |
| Flash point ℃ | 31 | 31 |
* Volume solids (measured in accordance with ISO 3233: 1998, GB / T9272 eqv)
Drying time (25 ℃)
Table dry ≤ 2h
Hard work ≤ 12h
Overcoating interval time
| temperature | 5℃ | 20℃ | 30℃ |
| The shortest | 12h | 8h | 6h |
| longest | Unlimited | ||
Recommended coating number 2, dry film thickness 80mm
615-1 aluminum powder chlorinated rubber antirust paint, 615-2 aluminum powder chlorinated rubber antirust paint, 616 chlorinated rubber iron red thick slurry antirust paint, 842 epoxy cloud iron antirust paint .
Surface treatment
• Before the paint should be completely dry
• Remove all oil and debris from the paint film
Construction conditions
• Substrate temperature should be above 3 ℃ above dew point
· Relative humidity not more than 85%
Coating method
Airless spray
Diluent 101 Diluent
Dilution 0-5% (by weight of paint)
Nozzle diameter 0.4-0.5mm
The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)
Air spraying
Diluent 101 Diluent
Dilution 0-10% (by weight of paint)
Nozzle diameter of 2.0-3.0mm
Air pressure 0.3-0.4MPa (about 3-4kg / cm2)
Roll coating / brushing
A coating can not achieve the recommended dry film thickness
Diluent 101 Diluent
Dilution 0-3% (by weight of paint)
Cleaner 101 Diluent
For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).
Packaging 20L drums 24kg
Shelf life of 12 months
Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.
Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.
If you have questions, you can：
