<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          AC-15615Chlorinated rubber aluminum powder antirust paint

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of chlorinated rubber, plasticizers, aluminum powder and other anti-rust paint, additives and solvents composed of anti-rust paint.

          Key Features

                        Water vapor and oxygen permeability of the paint film is low, with excellent water resistance and good corrosion resistance

                        Dry fast, several times faster than the oil paint dry

                        Excellent low-temperature construction performance, can be -20 ~ 50 environment construction

                        Film has good adhesion to steel

                        The coating layer is miscible with the layer and has excellent interlayer adhesion. In the old paint on the chlorinated rubber re-maintenance coating, do not have to get rid of the old solid paint, easy maintenance

                        Film is not saponified, and cathodic protection has a good matching

                        Has good durability

                        Obtained the type approval of the Ministry of Agriculture

          Uses Applicable to anti-corrosion of ship bottom, marine waterline, offshore steel structure and other steel structure.

          Appearance of silver

          Construction parameters

                        Volume of solid 37 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

                        The dry film thickness is 40mm

                        Wet film thickness of 108mm

                        Theoretical amount of 124g / m2

                        A flash point of 31 C

          Drying time

          temperature52030
          Table dry4h2h1h
          Hard work24h12h8h

          Overcoating interval time

          temperature52030
          The shortest12h8h6h
          longestUnlimited

          Recommended coating number 2-3 Road, dry film thickness 80-120mm.

          702 epoxy zinc-rich shop primer or 703 epoxy iron red shop primer, 704 inorganic zinc silicate shop primer, or direct painting in line with the quality requirements of steel derusting surface.

          After the road supporting the paint 616 chlorinated rubber iron red thick slurry antirust paint, or colored chlorinated rubber topcoat.

          Surface treatment

                         * There are oxide steel: sandblasting to Sa2.5 level

                          No oxide steel: Elastic grinding wheel grinding to St3 level, or sandblasting to Sa2.5

                          Steel coated with shop primer: secondary rust of paint film damage and corrosion, sanding with elastic grinding wheel to St3 level

                         * Welding, flame cutting or fire correction burned parts: the elastic grinding wheel grinding to St3 level

          Construction conditions

                         • Substrate temperature should be above 3 above dew point

                          Relative humidity not more than 85%

          Coating method

          Airless spray

                     Diluent 101 Diluent

                     Dilution 0-5% (by weight of paint)

                     Nozzle diameter 0.4-0.5mm

                     The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)

          Air spraying

                         Diluent 101 Diluent

                         Dilution 0-10% (by weight of paint)

                         Nozzle diameter of 2.0-3.0mm

                         Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

          Roll coating / brushing

                         A coating can not achieve the recommended dry film thickness

                         Diluent 101 Diluent

                         Dilution 0-3% (by weight of paint)

          Cleaner 101 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 22kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>