<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          615-1615-2 Aluminum chloride chlorinated rubber antirust paint

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of chlorinated rubber, plasticizers, aluminum powder and other anti-rust paint, additives and solvents composed of anti-rust paint.

          Key Features

                         Water vapor and oxygen permeability of the paint film is low, with excellent water resistance and good corrosion resistance

                         Dry fast, several times faster than the oil-based paint dry

                          Excellent low-temperature construction performance, can be -20 ~ 50 environment construction

                          Film has good adhesion to steel

                          The coating layer is miscible with the layer and has excellent interlayer adhesion. In the old paint on the chlorinated rubber re-maintenance coating, do not have to get rid of a solid old paint, easy maintenance

                         In the seawater film does not saponification, and cathodic protection have a good supporting sex

                          Has good durability

                          Type approval by China Classification Society

          Uses Applicable to anti-corrosion of ship bottom, marine waterline, offshore steel structure and other steel structure.

          Appearance 615-1 silvery white, 615-2 light aluminum red

          Construction parameters

          product name615-1615-2
          Volume solids  % *423423
          Dry film thickness    mm6060
          Wet film thickness    mm143143
          Theoretical consumption    g/m2193193
          Flash point    3131

          * pressGB/T9272 eqv ISO3233:1998Specified determination
          Drying time

          Table dry4h2h1h
          Hard work24h12h8h

          Overcoating interval time

          The shortest12h8h6h

          Recommended coating Road 2, dry film thickness greater than 120mm

          702 epoxy zinc-rich shop primer or 703 epoxy iron red shop primer, 704 inorganic zinc silicate shop primer, or direct painting in line with the quality requirements of steel derusting surface.

          After the road supporting the paint 616 chlorinated rubber iron red thick slurry antirust paint, or colored chlorinated rubber topcoat.

          Surface treatment

                         * There are oxide steel: sandblasting to Sa2.5 level

                          No oxide steel: Elastic grinding wheel grinding to St3 or sandblasting to Sa2.5

                          Steel coated with shop primer: secondary rust of paint film damage and corrosion, sanding with elastic grinding wheel to St3 level

                         * Welding, flame cutting or fire correction burned parts: the elastic grinding wheel grinding to St3 level

          Construction conditions

                         • Substrate temperature should be above 3 above dew point

                          Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 101 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)

          Air spraying

                        Diluent 101 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

          Roll coating / brushing

                        A coating can not achieve the recommended dry film thickness

                        Diluent 101 Diluent

                        Dilution 0-3% (by weight of paint)

          Cleaner 101 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L drums 24kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>