Composed of chlorinated rubber, iron red and other anti-rust pigments, plasticizers, additives and solvents and other components of the anti-rust paint.

Key Features

              Water vapor and oxygen permeability of the paint film is low, with excellent water resistance and good corrosion resistance

              Dry fast, several times faster than the oil paint dry

              · Excellent low-temperature construction performance, can be -20 ℃ ~ 50 ℃ environment construction

              · Film has good adhesion to steel

              · The coating layer is miscible with each other and has excellent interlayer adhesion. In the old paint on the chlorinated rubber re-maintenance of the coating, do not have to get rid of a solid old film, easy maintenance

              · Film is not saponified in seawater, and cathodic protection has a good matching

              · Has good durability

              · Type approval by China Classification Society

Uses Applicable to anti-corrosion of ship bottom, marine waterline, offshore steel structure and other steel structure.

Appearance iron red

Construction parameters

              Volume of solid 42 ± 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

              Dry film thickness of 75mm

              Wet film thickness 179mm

              Theoretical amount of 236g / m2

              A flash point of 31 ° C

Drying time 

Overcoating interval time

Recommended coating number 2, dry film thickness of 150mm. 615-1,615-2 aluminum powder chlorinated rubber antirust paint for the anti-rust paint, the total dry film thickness of not less than 240mm.

The former road supporting paint 615-1,615-2 aluminum chloride chlorinated rubber antirust paint or 546 epoxy asphalt super-thick antirust paint, 846 epoxy asphalt thick-type antirust paint.

After the Road supporting the paint with colored chlorinated rubber topcoat, 833 Wuxi self-polishing antifouling paint, 839 long-lasting thick slurry antifouling paint.

Surface treatment

              • Before the paint should be completely dry

              • Remove all oil and debris from the paint film

Construction conditions

              • Substrate temperature should be above 3 ℃ above dew point

              · Relative humidity not more than 85%

Coating method

Airless spray

          Diluent 101 Diluent

          Dilution 0-5% (by weight of paint)

          Nozzle diameter 0.4-0.5mm

          The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)

Air spraying

              Diluent 101 Diluent

              Dilution 0-10% (by weight of paint)

              Nozzle diameter of 2.0-3.0mm

              Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

Roll coating / brushing

              A coating can not achieve the recommended dry film thickness

              Diluent 101 Diluent

              Dilution 0-3% (by weight of paint)

Cleaner 101 Diluent

For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

Packaging 20L drums 26kg

Shelf life of 12 months

Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.