<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          J43-31Various modified chlorinated rubber topcoat

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of chlorinated rubber, synthetic resin, plasticizer, coloring pigments, additives and organic solvents such as topcoat.

          Key Features

                        Dry fast, faster than the alkyd paint dry several times

                        * Has a certain anti-rust properties

                        Good flexibility and adhesion and resistance to seawater shock

                        Good weather resistance and durability

                        Excellent interlayer adhesion, no need to remove solid old paint film when repainting, easy maintenance

          Use Apply to ships above the waterline hull parts and superstructure and onshore steel structure for topcoat purposes.

          Appearance of the color

          Construction parameters

                         Volume of solid 39 3% (GB / T9272 eqv ISO3233: 1998 provisions of the determination)

                         The dry film thickness is 40mm

                         Wet film thickness 102mm

                         Theoretical amount of 135g / m2

                         A flash point of 27 C

                         Drying time (25 )

                         Refers to dry 0.5h

                         Hard work 12h

          Overcoating interval time

          Substrate temperature52030
          The shortest12h8h6h
          longestUnlimited

          Recommended coating number 2, dry film thickness 80mm.

          Before the road supporting the paint J53-32 modified chlorinated rubber anti-rust paint.

          Surface treatment

                         • Before the primer should be completely dry

                         • Remove oil and debris from the paint film

          Construction conditions

                         • Substrate temperature should be above 3 above dew point

                          Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 101 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure 12-15Mpa (about 120-150kg / cm2)

          Air spraying

                        Diluent 101 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

          Roll coating / brushing

                        Diluent 101 Diluent

                        Dilution 0-3% (by weight of paint)

          Cleaner 101 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging 20L barrels 25kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.


          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>