<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          653 Silver chlorinated rubber topcoat

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of chlorinated rubber, plasticizer, aluminum powder, additives and solvent composition of silver chlorinated rubber topcoat.

          Key Features

                        Water vapor and oxygen permeability of the paint film is low, with excellent water resistance and good corrosion resistance

                        Excellent low-temperature construction performance, can be -20 ~ 50 environment construction

                        Dry fast, faster than the alkyd paint dry several times

                        Good weather resistance and durability

          Use Apply to ship waterline, hull, superstructure, bridges, containers, hydraulic gates, and other steel surface for the protection and decoration purposes.

          The appearance of silver

          Construction parameters

          Volume solids 40 3% (measured in accordance with ISO 3233: 1998, GB / T 9272 eqv) (after mixing)

          Component A: Component B = 11: 4.2 (weight ratio)

          The dry film thickness is 40mm

          Wet film thickness of 100mm

          Theoretical amount of 110g / m2

          A flash point of 27

                    Group B 35

                        Drying time (25 )

                        Table dry 2h

                        Hard work 24h

          Painting interval

           The shortest36h24h12h
           longest           Unlimited

          Proposed Xu Road, air-spraying or airless spray 1-2 Road, dry film thickness 40-80mm

          Former supporting paint 615-1,615-2 aluminum powder Chlorinated rubber antirust paint for the anti-rust primer, 616 chlorinated rubber iron red thick anti-rust paint for the middle layer paint, or H06-4 epoxy Rich antirust paint for the primer, 842 epoxy cloud iron antirust paint for the middle layer paint.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        Relative humidity not more than 85%

          Coating method

          Airless spray

                    Diluent 101 Diluent

                    Dilution 0-5% (by weight of paint)

                    Nozzle diameter 0.4-0.5mm

                    The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)

          Air spraying

                        Diluent 101 Diluent

                        Dilution 0-10% (by weight of paint)

                        Nozzle diameter of 2.0-3.0mm

                        Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

          Roll coating / brushing

                        A coating can not achieve the recommended dry film thickness

                        Diluent 101 Diluent

                        Dilution 0-3% (by weight of paint)

          Cleaner 101 Diluent

          For safety measures, please refer to the Material Safety Data Sheet (MSDS) of Anhui Kailin New Material Co., Ltd. (formerly Tianchang Kailin Chemical Co., Ltd.).

          Packaging a group of 20L barrels 11kg

          Group B 4L barrels 4.2kg

          Shelf life of 12 months

          Note A and B components must be mixed evenly before use.

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>