<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          H42-31 colored epoxy anti-skid deck paint

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of epoxy resin, polyamide curing agent, anti-rust pigments, physical pigments, additives and solvents composed of two-component epoxy deck paint or anti-slip paint.

          Key Features

          Excellent abrasion resistance

          Excellent water resistance

          * Tough film, with a certain degree of roughness

          * Has excellent adhesion, impact resistance and other physical properties

          Has good durability

          Use Apply to ship steel deck for anti-skid paint.

          Appearance grass green, iron red, gray and other colors

          Construction parameters

          Volume solids 69 3% (measured according to ISO / IEC 3233: 1998) (after mixing)


                        Group A: Group B = 3: 1 (weight ratio)

                        The dry film thickness was 90 m

                        The wet film thickness was 130 m

                        The theoretical amount of 179g / m2

          A flash point of 27

                         Group B 27

                        Drying time (25 )

                        Refers to dry 4h

                        Hard work 24h

                        Fully cured 7d

                        Curing time (after mixing) (25 ) 30min

                        Pot life (after mixing) (25 ) 6h

          Overcoating interval time

          The temperature




          The shortest




          The longest




          Recommended coating Road 2-3 Road, dry film thickness 180-270m (not including the thickness of carborundum).

          Road before supporting paint with H06-4 epoxy zinc-rich anti-rust paint, E06-1 inorganic zinc silicate antirust paint, 842 epoxy cloud iron antirust paint

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        • Substrate temperature should be above 3 above dew point

                        When the temperature is lower than 5 , the reaction between epoxy and curing agent is stopped, so it is not suitable for outdoor construction

                        Relative humidity not more than 85%

          Painting methods can be used without air spray or brush the construction method.

          (1) in the H06-4 epoxy zinc-rich anti-rust paint or E06-1 inorganic zinc silicate antirust paint, 842 epoxy cloud iron antirust paint on the first anti-corrosion paint on the epoxy deck together, the film is dry before Sprinkle with carborundum or tire powder, so that it sticks to the film, the next day will not stick the particles swept away, and then painted the 2nd and 3rd deck anti-skid paint. So that non-slip material in the two solidification between the film.

          The first one paint about 0.4kg / m2, the amount of 3-4kg / m2 diamond,

          The first 2,3 Road paint about 0.3kg / m2.

          Deck paint: Carborundum = 1: 3 (weight ratio)

                           Or deck paint: tire powder = 1: 0.1-0.15 (weight ratio)

          (2) in the deck paint transferred into the 10-20% tire powder (through 20 mesh) with a scraper on the deck scraping.

          (3) as an ordinary deck paint without the need to add carborundum or tires powder, A and B components mixed curing, the former primer on the use of spraying or brushing method for construction.

                        Diluent 103 Diluent

                        Dilution 0-3% (by weight of paint)

          Cleaning agent 103 Thinner

          Safety precautions Refer to the MSDS.

          Packing group A 20L barrel 25.5kg

                           Group B is 8.5L in 10L drums

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>