<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          B43-31 colored acrylic topcoat

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composed of acrylic resin, rutile titanium dioxide, coloring pigments, additives and organic solvents such as the composition of the acrylic paint.

          Key Features

                        Excellent weather resistance and durability

                        Excellent construction performance, can be in -20 ~ 50 environment construction

                        Dry fast

                        Easy maintenance, do not have to remove or polish the old paint film when repairing the old acrylic paint film


          It is suitable for protecting and decorating the surface of various steel structures such as hull, ship superstructure, power plant, steel plant, chemical plant, bridge, container, hydraulic steel gate, dry gas cabinet.

          The appearance of various colors, light or matte

          Construction parameters

                        Volume of solid 39 3% (according to GB / T9272 eqv ISO3233: 1998 provisions of the determination)

                        The dry film thickness was 40 m

                        The wet film thickness was 103 m

                        Theoretical amount of 123g / m2

                        A flash point of 25 C

                        Drying time (25 )

                        Refers to dry 2h

                        Hard work 24h

          Overcoating interval time  

             The temperature




             The shortest




             The longest



          Recommended coating number 2, dry film thickness 80m.

          The former road supporting paint 842 epoxy cloud iron antirust paint, 615-1,615-2 aluminum powder chlorinated rubber antirust paint, 616 chlorinated rubber iron red thick antirust paint.

          Surface treatment

                        • Before the paint should be completely dry

                        • Remove all oil and debris from the paint film

          Construction conditions

                        Substrate temperature should be higher than 3 above dew point, steel plate temperature should not be higher than 60

                        Relative humidity not more than 85%


          Coating method

          Airless spray

                    Thinner 102 thinner

                    Dilution 0-5% (by weight of paint)

                    The nozzle diameter is 0.2-0.4mm

                    The discharge pressure is 15 to 20 MPa (about 150 to 200 kg / cm2)

          Air spraying

                        Thinner 102 thinner

                        Dilution 0-10% (by weight of paint)

                        The nozzle diameter is 2.0-2.5mm

                        Air pressure 0.3-0.4MPa (about 3-4kg / cm2)

          Roll coating / brushing

                        Thinner 102 thinner

                        Dilution 0-3% (by weight of paint)

          Cleaner 102 thinner

          Safety precautions Refer to the MSDS.

          Packaging 20L barrels 22kg

          Shelf life of 12 months

          Remark For the correct use of our products, please carefully read the "User's Guide" in this manual.

          Statement The above data and data are based on our test and practical experience in the use of accumulated and can be used as construction guide. We do not understand the situation in the construction, we only guarantee the quality of the paint itself, other issues will not be responsible. For this manual, we will be based on the continuous improvement of products have the right to modify.

          If you have questions, you can

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>