<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          H06-14 iron red / gray epoxy antirust primer (two-component)

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Product composition:

          By epoxy resin, red iron oxide and new rust-proof pigments, anti-rust additives, mixed solvents, polyamine compounds for the preparation of curing agent. A, B two-component packaging.

          Product performance:

          A room - temperature curing workshop anti - corrosion primer. Dry fast, excellent physical and mechanical properties of the coating, with various types of bottom, topcoat supporting the use of. Because it does not contain metal zinc and other substances, thereby reducing the welding gas on the human body harm.

          Uses: Suitable for steel plate automatic shot blasting line and after rust as a primer. Dry film thickness to 25μm, the effective protection of the plate for about 6 months.

          Construction parameters:

          Theoretical dosage: 120-160g / ㎡

          Wet film thickness: 80 μm

          Dry film thickness: 20-25μm

          Pot life: 23 ± 2 ℃ 8 hours

          Drying time: dry 30 minutes, hard work 24 hours (23 ± 2 ℃, relative humidity 55 ± 5%), overcoating time: 23 ± 2 ℃ 24 hours

          Construction Reference:

          Recommended Painting Road: 1-2 Road.

          After supporting the coating: epoxy resin coating, chlorosulfonated polyethylene paint, polyurethane coatings, chlorinated rubber coatings.

          Surface treatment: to be painted surface must remove oil, water, rust and so on. There are oxide steel, sandblasting to St2.5.

          No oxidation of steel, pneumatic, electric or hand-polished to St3 level.

          Construction temperature: construction temperature below 5 ℃, should not be used.

          Curing time: 23 ± 2 ℃ 30 minutes

          Construction methods: spraying, brushing, roller coating

          Thinner: XH-1 epoxy diluent

          Dosage: 0-5% or as appropriate dilution.

          Safety measures: pay attention to the construction site to have a good ventilation and other environmental protection measures, and is strictly prohibited fire.

          Packing: Main paint: 24㎏ / barrel curing agent: 4kg / pot

          Shelf life: 12 months under the conditions specified.

          Note: For correct use of this product, please carefully read the instructions.

          Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products have the right to modify without notice

          If you have questions, you can:

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>