Product composition: from thermoplastic acrylic resin, red iron oxide, such as anti-rust pigments, physical pigments, additives and solvents from the preparation.

Product performance: good adhesion, anti-rust, acrylic and other surface paint with good adhesion.

Usage: black metal backing rust.

Construction parameters:

Specific gravity: about 1.25g / cm3

Theoretical dosage: 120g / m2

Wet film thickness: 60 μm

Dry film thickness: 25 μm

Drying time: Surface dry 0.5 hours, hard work 6 hours (23 ± 2 ℃, relative humidity 55 ± 5%)

Maturation time: open evenly after mixing can be used.

Painting interval: more solid paint prevail Road, the general interval of 24h.

Construction Reference:

Proposed Painting Road: 1-2 Road (according to the actual requirements to determine the number of construction Road).

After the Road supporting coatings: colored one-component acrylic finish.

Surface treatment:

Be coated surface must be removed water, oil, rust and so on;

There are oxide steel, sandblasting to Sa2.5 level;

No oxidation of steel, pneumatic, electric or manual grinding to Sa3 level.

Substrate temperature: substrate temperature must be higher than the dew point above 3 ℃, to prevent condensation of water vapor in the steel surface.

Construction methods: spraying, brushing, roller coating

Thinner: XB-2 acrylic acid thinner;

Dosage: 0-15% or as appropriate.

Safety measures: In a narrow space or limited space construction, ventilation and other protective measures must be strengthened, and open flame is strictly prohibited.

Packing: 25kg / barrel

Shelf life: 12 months under the specified conditions.

Note: For correct use of this product, please carefully read the instructions.

Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products are subject to change without notice.