Products: modified alkyd resin, anti-rust pigments, physical pigments, driers, additives and solvents from the preparation.

Product performance: good rust, dry fast, strong adhesion, good adaptability to the construction.

Product use: industrial environment in the ferrous metal surface primer rust, not for underwater parts.

Construction parameters:

Specific gravity: about 1.50 g / m3

Theoretical dosage: 160g / m2

Wet film thickness: 80 μm

Dry film thickness: 40 μm

Flash point: 35 ℃

Drying time: dry 4 hours, hard work 24 hours (23 ± 2 ℃, humidity 55 ± 5%)

Maturation time: open evenly after mixing can be used

Overcoating time: 1-15 days at room temperature

Construction Reference:

Recommended coating number: 2, dry film 80μm

After supporting paint: a variety of alkyd-type finish

Surface treatment: the surface must be painted to remove water, oil, rust and so on.

There are oxide steel, sandblasting to Sa2.5 level.

No oxidation of steel, pneumatic, electric or hand-polished to St3 level.

Substrate Temperature: Substrate temperature must be above 3 ℃ above dew point

Construction methods: spraying, brushing, roller coating

Thinner: XC alkyd diluent

Dosage: 0-5% by weight or, as appropriate, diluted

Safety measures: in the narrow or limited space construction, ventilation must be strengthened and open flame is strictly prohibited.

Packing: 25kg / barrel

Shelf life: 12 months under the specified conditions.

Note: For correct use of this product, please carefully read the instructions.

Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products are subject to change without notice.