<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          200-600 ℃ high temperature anti-corrosion paint

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Composition: by the silicone resin, ultra-fine aluminum powder, special heat-resistant pigments, additives, solvents and other components.

          Performance: excellent heat resistance, resistance to sudden changes in temperature, can withstand 200 ℃ -600 ℃ high temperature; and has excellent corrosion resistance, chemical atmosphere, weather aging, water, moisture, room temperature dry, dry quickly, construction Convenience.

          Uses: used to be high-temperature steel surface.

          Construction parameters:

          Color: Primer: silver gray; Topcoat: silver gray.

          Theoretical dosage: primer: 120-160 g / ㎡, topcoat: 100-110 g / ㎡

          Wet film thickness: primer: 90μm, topcoat: 70μm

          Dry film thickness: primer: 30μm, topcoat: 25μm

          Maturation time: Stir well after use.

          Drying time: 23 ± 2 ℃, primer: surface dry: 1 hour, hard work: 24 hours; topcoat: 1 hour, hard work: 24 hours.

          Overcoating time: 23 ± 2 ℃, primer: the shortest 24 hours, the longest unrestricted; topcoat: the shortest 24 hours, the longest unrestricted.

          Construction Reference:

          Recommended Painting Road: 1-2 Road

          Surface treatment: the new steel surface by blasting or shot blasting to achieve the Swedish derusting standard Sa2.5 level, roughness of 40-70μm surface can be hand-machined mechanical derusting to achieve the Swedish derusting St3 level, roughness To 40 m or more.

          Substrate Temperature: Substrate temperature must be above 3 ℃ above dew point

          Construction methods: spraying, roller coating.

          Thinner: XW high temperature paint thinner.

          Dosage: 0-10% by weight or, as appropriate, diluted.

          Safety measures: pay attention to the construction site to have a good ventilation and other environmental protection measures, and is strictly prohibited fire.

          Note: the bottom, top coat dry film thickness of not more than 60μm. Too thick will produce paint film cracking phenomenon.

          Packing: primer: 20kg / barrel; topcoat: 20kg / barrel.

          Shelf Life: 6 months, subject to specified conditions.

          Note: For correct use of this product, please carefully read the instructions.

          Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products are subject to change without notice.

          If you have questions, you can:

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>