Product composition:

From the thermoplastic acrylic resin, paint, solvents, plasticizers and other preparation.

Product performance:

With fast drying, light and color retention is good, and good weather resistance.

Product Usage:

Applicable to all kinds of steel surface coating, can also be used for concrete, cement substrate and other buildings decoration and protection.

Color: all colors.

Construction parameters:

Density: about 1.21 g / m3

Theoretical dosage: 150g / ㎡;

Curing time: open even after mixing can be used.

Drying time: 23 ℃, surface dry 0.5 hours; hard work: 6 hours. And dried at 60 ° C for 1 hour.

Construction Reference:

Recommended Painting Road: 1-2 Road (according to product protection and construction requirements to determine).

Former matching paint: iron red acrylic primer.

Surface treatment: If the oil surface to be painted must be cleaned, and keep dry. Such as priming with a primer, you should wait for the primer to dry before applying.

Substrate temperature: substrate temperature must be higher than the dew point above 3 ℃, to prevent condensation of water vapor in the steel surface into dew.

Construction methods: thinner: XB-2 acrylic acid diluent

Dosage: Brush: 0-10% or as appropriate.

Spray: 0-20% or as appropriate.

Security measures:

Attention to the construction site to have a good ventilation and other environmental protection measures, and is strictly prohibited fire.

Packing: 20kg / barrel

Shelf life: 12 months under the specified conditions.

Note: For correct use of this product, please carefully read the instructions.

Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products are subject to change without notice.