Product composition: from thermoplastic acrylic resin, paint, solvents, plasticizers and other preparation.

Product performance: with fast drying, good color retention and light, and good weather resistance.

Usage: Applicable to all kinds of steel surface coating, can also be used for concrete, cement substrate and other buildings decoration and protection.

Construction parameters:

Color: all colors.

Theoretical dosage: 150g / ㎡.

Drying time: dry 0.5 hours; hard work: quick-drying 6 hours (23 ± 2 ℃, relative humidity 55 ± 5%).

Curing time: open even after mixing can be used.

Overcoating time: room temperature 12h.

Construction Reference:

Recommended coating number: 2.

Former matching paint: epoxy iron red primer, epoxy red anti-rust primer, red iron acrylic primer.

Surface treatment: If the oil surface to be painted must be cleaned, and dry. If primer primer, it should be dry after the primer with polished smooth sandpaper and then applied.

Substrate Temperature: Substrate temperature must be above 3 ℃ above dew point.

Construction methods: brushing, spraying

Thinner: XB-2 acrylic enamel thinner

Dosage: 0-20% or as appropriate.

Security measures:

Attention to the construction site to have a good ventilation and other environmental protection measures, and is strictly prohibited fire.

Packing: 20kg / barrel

Shelf life: 12 months under the specified conditions.

Note: For correct use of this product, please carefully read the instructions.

Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products are subject to change without notice.