Product composition: from acrylic resin, paint, solvents, curing agent made of. B52-6 which uses HDI curing agent, weatherability better.

Product performance: with fast drying, good color retention and light, and good weather resistance.

Usage: Applicable to all kinds of steel surface coating, can also be used for concrete, cement substrate and other buildings decoration and protection.

Construction parameters:

Color: all colors.

Proportion: See label. Theoretical dosage: 150g / ㎡

Drying time: surface dry 0.5 hours; hard work: 12 hours (23 ± 2 ℃, relative humidity 55 ± 5%).

Maturation time: 20 minutes.

Overcoating time: 12 hours.

Construction Reference:

Recommended coating number: 2.

After the Road supporting coating: iron red epoxy primer / iron red polyurethane primer.

Surface treatment: If the oil surface to be painted must be cleaned, and dry. If primer primer, it should be dry after the primer with polished smooth sandpaper and then applied.

Substrate Temperature: Substrate temperature must be above 3 ℃ above dew point.

Construction method: Brush, spray

Thinner: XB-4 acrylic acid thinner

Dosage: 0-10% or as appropriate.

Safety measures: pay attention to the construction site to have a good ventilation and other environmental protection measures, and is strictly prohibited fire.

Packing: B52-4 main paint: 21kg / barrel, curing agent: 7kg / pot

         B52-6 main paint: 20kg / barrel, curing agent: 5kg / pot

Shelf life: 12 months under the specified conditions.

Note: For correct use of this product, please carefully read the instructions.

Disclaimer: The above information and data is accumulated in the experimental conditions and actual use, and can be used as a construction guide. We only guarantee the quality of the paint, for this manual, we will be based on the continuous improvement of products are subject to change without notice.