<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>

          Back

          Water-based epoxy anti-rust primer

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Product character

          1, the product is water-based anti-rust primer in the conventional products to water-based epoxy resin for the film material to modified polyamide as a cross-linking agent, so that water-based epoxy molecules can be a good balance, so as to obtain effective and durable anti- Corrosion effect.

          2, high hardness, adhesion, water, salt, acid and alkali; fast drying, corrosion inhibition effect; not flash rust, can not afford skin, and a variety of paint, topcoat has a good phase Capacitive.

          3, widely used in automobile manufacturing, highway bridges, pipeline storage tanks, petrochemical facilities, oil refineries, power plants, containers and other anti-corrosion anti-oxidation higher requirements of the industry.

           

          Technical indicators    

          Project

          Indicators

          Viscosity(s)

          ≤50

          Fineness(μm)

          ≤40

          Solid content(%)

          ≥50

          Drying time(h)

          Table dry≤0.5

          Hard work≤24

          Adhesion (grade)

          1

          Resistance to impact strength(kg/cm)

          50

          Flexibility(mm)

          1

          Alkali resistance(10%NaOH.h)

          48

          Acid resistance(10%H2SO4.h)

          48

          Resistant to aviation kerosene(h)

          500

          Salt water resistance(10%NaCL.h)

          500

          Salt spray resistance(h)

          500

          Resistant to running water(h)

          500

          Theoretical spreading rate(m2/kg)

          8-10

          VOC emissions(mg/L)

          <50

          (International ≤ 200; EU standard ≤ 150)



           

          Construction guidance

          1, the substrate surface after blasting or blasting treatment, to achieve the surface without oil and oxide, clean and smooth, no water stains.

          2, the product is two-component water-based paint, construction should be before the A, B components in proportion to the deployment of a clean tap water diluted to the required viscosity, stirring evenly. It is recommended to add water 20-30%, stir evenly after standing for 30min or so to paint.

          3, the product can be a one-time thick coating, as long as the slow gun, control does not produce the phenomenon of sagging can be.

          4, dry film thickness to rust-proof grade, whichever is 20μm, 40μm, 80μm, and even> 100μm.

          5, dry and cool place to store, to prevent exposure.

          If you have questions, you can:

          Or leave a message for us.

          Related recommendation
          Online Service

          Hotline

          0550-7911368

          在线电影播放,奇米第四包,日本一区二区精品视频,一级按摩片A一级按摩

              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>