<address id="9hx9l"></address>
      <form id="9hx9l"></form>
        <form id="9hx9l"></form>

        <form id="9hx9l"></form>


          Water-based epoxy zinc-rich primer

          Product introduction

          Form :
          Main characteristics :
          Purpose :
          Appearance :

          Product character

          1, the product of water-based epoxy resin, modified polyamide crosslinking agent for the copolymer, the oil-soluble resin dispersed in water to form a thermostable system; take into account the same self-emulsifying resin grafting, the water-based Epoxy molecules get a good balance, access to effective and durable corrosion inhibition and anti-rust purposes. Coating with high hardness, strong adhesion, water resistance, weather resistance, acid and alkali resistance of the anti-corrosion effect.

          2, water-based epoxy zinc-rich primer is a clean tap water as the dispersion medium and thinner eco-friendly low-carbon eco-friendly paint. This product does not contain organic solvents and harmful heavy metals, low VOC emissions, non-irritating taste, no harm to human body, no pollution to the environment, non-flammable non-explosive, construction safety, process broad, simple and convenient.

          3, This product is suitable for automobile industry, road bridges, oil and gas storage tanks, drilling platforms, oil refineries, power plants, chemical plants, containers and other anti-corrosion, anti-oxidation requirements of relatively high industry.


          Technical indicators    




          Appearance (visual)


          Solid content(%)


          Drying time(h)

          Table dry≤2

          Hard work≤12

          Adhesion (grade)


          Impact resistance(kg/cm)




          Pencil hardness


          Resistance to salt spray(h)


          Water resistance(h)


          Resistant to artificial aging(h)


          VOC emissions(mg/L)








          Construction guidance

          1, the substrate surface after blasting or potential pill treatment, to achieve the surface without oil and oxide, clean and smooth, no water stains.

          2, the product is two-component water-based paint, construction should be before the A, B components in proportion to the deployment of a clean tap water diluted to the required viscosity, stirring evenly. It is recommended to add water 20-30%, stir evenly after standing for 30min or so to paint.

          3, the product can be a one-time thick coating, as long as the slow gun, control does not produce the phenomenon of sagging can be.

          4, dry film thickness to rust-proof grade, whichever is 20μm, 40μm, 80μm, and even> 100μm.

          5, dry and cool place to store, to prevent exposure.

          If you have questions, you can:

          Or leave a message for us.

          Related recommendation
          Online Service




              <address id="9hx9l"></address>
              <form id="9hx9l"></form>
                <form id="9hx9l"></form>

                <form id="9hx9l"></form>